For those wanting to take it to the next level The Professional ChassisCoater Kit has the added peace of mind knowing that you have the toughest most permanent UV stable coating system there is to be had with the addition of BlackTop in Full Gloss or Factory OEM Satin.

• AquaKlean – An Industrial Strength Cleaner & Degreaser.
• RustBlast – A Rust Remover & Zinc Phosphate Metal Prep.
• RustSeal – A Non Porous Waterproof, Rust Preventive Sealer (Black Gloss only).
• BlackTop – A Superior Topcoat With Unbeatable UV Protection & Flexibility. Available in Gloss Black or OEM Satin Black.
• #1 Thinner – Use to Thin Spray Applications and for Clean Up.
• Brushes, Gloves & Instructions – The Necessities For Every Project.
• Will cover 5.6 m2 – 2 Coats of RustSeal, 1 Coat of BlackTop.

KBS Coatings  of KBS AquaKlean, KBS RustBlast and KBS Rust Seal is the most effective rust and corrosion prevention system available today – see the .

Kit Contents

• 1 Litre AquaKlean
• 1 Litre RustBlast
• 1 Litre RustSeal (Black Gloss)
• 500mls BlackTop (Gloss or OEM Satin)
• 250mls KBS #1 Thinner
• 1 pair of KBS Black Nitrile gloves
• 2 X 25mm Paint Brushes

RustSeal 3 Step Total Rust Eradication System

PENETRATE, ERADICATE, ANNIHILATE

KBS Coatings products are designed to work as a COMPLETE SYSTEM. Our all-inclusive 3 STEP TOTAL RUST ERADICATION system is specifically designed and formulated to ensure better surface preparation, exceptional adhesion and durability, uniform sheens, improved UV stability, and permanent rust sealing powers.

When used together, these products provide you with a coating that will not only stop rust, but will protect it from returning. To aid you in your particular rusty metal project, we have included the following steps to explain the various stages in rust prevention. For an overview of the KBS 3 Step System, be sure to also check out the 

We recommend you also read our 3 Step Detailed Instructions.

1. PENETRATE

AquaKlean should always be diluted with water. For general purpose cleaning, apply liberally and wash surface for 5-10 minutes. For heavy-duty cleaning, extended soaking times up to 24 hours or

more may be necessary. Use a bristle brush or scouring pad to expedite the cleaning of heavily soiled surfaces. Repeat as necessary until clean.

Do not allow AquaKlean to dry before rinsing. Rinse thoroughly with water after cleaning and let dry.

2. ERADICATE

Liberally apply RustBlast FULL-STRENGTH to a DRY surface using a spray bottle, brush, roller, or backpack sprayer for larger applications.

Re-apply often and as needed to keep the surface wet for a minimum of 10 minutes for smooth or lightly rusted surfaces, 20-40 minutes for moderately rusted surfaces and 1-2 hours for heavily rusted or corroded surfaces. DO NOT allow surface to dry.

After treatment, rinse thoroughly with water and then allow surface to dry completely.

3. ANNIHILATE

Apply RustSeal to prepared surfaces by brush, roller, or spray equipment. Brush marks will level out as if sprayed.

Always apply a MINIMUM of 2 full coats (50um each) for general applications. For marine or industrial applications, apply a minimum of 3 full coats (50um each). Recoating can be done once the first or consecutive coat is dry-to-touch.

KBS System Sampler Kit contains all you need to get started and eradicate rust from an area of 1m square.

For larger areas the products can be purchased individually or in our Chassis Coater Kit and Chassis Coater Kit Pro.